The network devices can be damaged through different factors. The extreme lightning strikes, electronic static discharge, and electrical fast transient bursts are some of them. You can protect your network devices by using our Non-PoE gigabit Ethernet surge & lightning protector. It comes with high-quality built and advanced technological features.

It is usually installed between connecting network cables and network devices. You can buy this amazing product from Whizcables at a cost-effective price and saves your expensive devices from getting damaged. Our Non-PoE gigabit Ethernet surge and lightning protector is a certified product from the quality check regulatory bodies of the US. It comes with guaranteed performance and quality. Book your order now at Whizcables and receive this amazing product at your doorstep in no time.


Electrical Specifications







Low Capacitance TVS Diodes Array

ESD IEC 61000-4-2

EFT IEC 61000-4-4

Lightning IEC 61000-4-5

15 kV (Air), 8kV (contact) 40 A (5/50ns)

12 A (8/20µs)

Peak Pulse Power (tp.=8/20µs) 300 Watts
Peak Pulse Current (tp.=8/20µs) 12 A
Reverse Stand-Off Voltage 5 V Max.
Reverse Breakdown Voltage 6 V Min. (It=1mA)
Reverse Leakage Current 5 µA (VRWM=5V, T=25ºC)
Forward Voltage 1.2 V (If=15mA)

Clamping Voltage

12.5 V @ 1A, tp.=8/20µs

17.5 V @ 5A, tp.=8/20µs

25 V @ 12A, tp.=8/20µs

Junction Capacitance Typical: 3pF; Max. 5pF




Protection Thyristors

Voltage off State 58 VDRM @ 5 µs
Voltage Break over 77 Vs. @ 100 V/µs
Voltage On State 5 V
Current Hold 150 mA
Current Peak Pulse 400 A (8/20µs)
Current Peak Pulse 100 A (8/1000µs)
Capacitance (@1MHz, 2V Bias) 85pF max.
55pF min.






Miniature 3-Pole Gas Discharge Tube

DC Spark over ±20%@100V/s 150 V
Impulse Spark over 350 V (100 V/µs)
500 V (1000 V/µs)
Impulse Transverse Delay <75 ns (100 V/µs)
Insulation Resistance >1010 Ω (100 V)
Glow Voltage ~70 V (10 mA)
Arc Voltage ~10 V (1 A)
Capacitance < 2pF (1 MHz)
DC Holdover Voltage < 150 ms. (80 V)
Impulse Discharge Current >10 Operations (1000A, 8/20µs)
Climatic Category (IEC 60068-1) 40/90/21


Overcurrent Protection Switch (Voltage: 30 V max., AC or DC)

Hold Rated Current 1.1 A @ 23°C. Hold
Current Ratings 1.1 A Hold & 2.2 A Trip @ 23°C.
Initial Resistant Values 0.1Ω Min., 0.18Ω Max. @ 23°C.
Time to Trip 6.6 Seconds @ 5.5A @ 23°C.
1hr Post-Trip Resistance Std. Trip 0.27 Ω @ 23°C.
Tripped-State Power Dissipation 0.70W @ 23°C Nom.



There are no reviews yet.

Be the first to review “Non-PoE Gigabit Ethernet Surge & Lightning Protector | WhizCables”

Your email address will not be published. Required fields are marked

Ethernet Surge Non-PoE Gigabit Ethernet Surge...